How many layers of shingles can be removed during replacement?

We remove all layers down to the decking on Troy homes to prevent telegraphing and allow proper inspection of the plywood.

Do you install ice and water shield on every roof?

Yes, we place it along the eaves at least six feet up and in all valleys to address the ice dam risk common in southeast Oakland County winters.

What happens if decking damage is found?

We document and replace any soft or rotted sections before new underlayment goes down so the roof has a solid base.

Can replacement work around HOA rules in subdivisions?

We match existing shingle style and color, keep the roof line clean, and handle all cleanup so visible changes stay within typical Troy subdivision guidelines.

Asphalt Shingle Roof Replacement in Troy, MI

Troy homes from the 1960s through 1990s along Rochester Road Corridor and near Somerset often carry second or third asphalt roofs that show granule loss, curling edges, and cracked step flashing after decades of humid continental winters. Mature trees drop limbs that dent shingles while freeze-thaw cycles push water under valleys and around pipe boots, creating leaks that reach the decking. Wind-driven rain and occasional hail accelerate wear on south-facing slopes and ridge lines, especially in subdivisions where HOA rules limit visible repairs.

We begin every job with a deck-level inspection that checks for soft plywood, rotted fascia, and failed underlayment before any tear-off starts. Once the old shingles and layers are removed we install ice and water shield along eaves, valleys, and around all penetrations, add drip edge, then lay new architectural shingles with proper nailing patterns and ridge vent tied into existing soffit intake. Flashing is replaced at every wall, chimney, and skylight to match the existing roof planes.

Subdivision layouts near Big Beaver and Oakland Mall create tight access and shared property lines that require careful debris containment and neighbor coordination during tear-off. Many Troy colonials and ranches have low-pitch sections or additions that need extra underlayment and modified bitumen in the valleys. We work around existing gutters and downspouts, preserving them where possible while ensuring new shingles tie cleanly into the drip edge.

Technician insight

In Troy, the thing that catches most people out with Asphalt Shingle Roof Replacement is hidden deck rot along the north eaves of 1970s colonials near the Troy Historic Village. Ice dams from repeated freeze-thaw cycles push water under old felt and rot the plywood before homeowners notice interior stains. Once we tear off we often find the first three feet of decking needs replacement even when the shingles still look salvageable from the street.

Ice Dam Leak on 1978 Colonial Near Somerset

Water stains appeared in the upstairs hallway after a January thaw. Tear-off revealed rotted decking and failed underlayment along the north valley where mature trees blocked sun. We replaced the damaged plywood, installed full ice and water shield, and tied new architectural shingles into the existing ridge vent. No further leaks occurred the following winter.

Asphalt Shingle Roof Replacement Services We Offer

✓Full Tear-Off Replacement

Remove all existing layers down to the decking so new underlayment and shingles sit flat without telegraphing old damage.

✓Architectural Shingle Upgrade

Replace standard three-tab with thicker architectural shingles that better resist Troy wind and hail while improving curb appeal on ranch and colonial homes.

✓Ice and Water Shield Installation

Apply self-adhering membrane along eaves, valleys, and penetrations to stop ice dam leaks common after Troy freeze-thaw cycles.

✓Ridge Vent and Soffit Intake Upgrade

Add or replace ridge vent and ensure matching soffit intake to reduce attic moisture and ice dam risk on 1970s-1980s homes.

✓Decking Repair During Replacement

Replace damaged plywood or OSB discovered after tear-off so the new roof has a solid, dry base before shingles go down.

How it works

1
Site Inspection
Walk the roof and attic to map leaks, check deck condition, and note existing ventilation, flashing, and HOA-visible details.
2
Tear-Off and Deck Prep
Remove all shingles and underlayment, haul debris, then repair or replace damaged decking and install new drip edge.
3
Underlayment and Flashing
Roll out ice and water shield at eaves and valleys, replace step flashing, pipe boots, and valley metal before shingle courses begin.
4
Shingle Installation and Ventilation
Lay architectural shingles, cut and seal ridge vent, tie in soffit intake, and clean up all materials from the property.

Tools and Methods We Use

Roofing Nail Gun and Air Compressor

Sets shingles fast and consistently at the correct depth. We run six nails per architectural shingle instead of the minimum four, which is what holds the field down in a 60 mph Troy wind event.

Pry Bar and Shingle Cutter

Strips old shingles and cuts new ones clean at valleys, ridges, and edges. Sharp cutters mean tight seams and fewer places for water to get under the field.

Chalk Line and Utility Knife

Snaps straight courses across the roof and trims underlayment and shingles to fit. Straight courses are what make the finished roof look right from the curb and seal properly at the seams.

Ladder Stabilizer and Safety Harness

Keeps ladders off the gutters and keeps every installer tied off on the roof. MIOSHA-compliant fall protection is non-negotiable on every pitch we work.

Magnetic Sweeper

Pulls stray roofing nails out of the lawn, driveway, and flower beds after the job. We run it twice so you are not finding nails in your tires a week later.

Ice and Water Shield Membrane

Self-adhering waterproof membrane applied along the eaves, valleys, and penetrations. This is the layer that stops ice dam meltwater from backing under the shingles in a Troy February.